• SuperPro Alloy Front Lower Control Arm Set (Additional Positive Caster & Negative Camber)
  • SuperPro Alloy Front Lower Control Arm Set (Additional Positive Caster & Negative Camber)
  • SuperPro Alloy Front Lower Control Arm Set (Additional Positive Caster & Negative Camber)
1 3

SuperPro

SuperPro Alloy Front Lower Control Arm Set (Additional Positive Caster & Negative Camber) ALOY0018K

SuperPro Alloy Front Lower Control Arm Set (Additional Positive Caster & Negative Camber) ALOY0018K

$ 749.99
$ 824.99 $ 749.99
Free shipping on orders over $99 (contiguous U.S.) — flat $10.99 under $99. Shipping details
✓ In Stock • Only 3 left

SuperPro's ALOY0018K offers a comprehensive DIY performance upgrade for your MQB Platform VW or Audi. Featuring pre-installed SuperPro bushings in the forward position of the arm and SuperPro's DuroBall bushing assembly at the rear the kit bolt on alloy arm with upgraded bushings and optimized geometry with additional caster and an increase in negative camber. The alloy arm brings strength, rigidity and a small weight savings relative to the OE steel arms. The geometry upgrades offer improved tire contact patch at the front end when accelerating, cornering and braking - working the tire more effectively and efficiently to generate greater grip and traction along with improved turn-in and mid-corner grip. SuperPro Tip: Care needs to be taken with aggressively lowered vehicles also utilizing wider wheels/tires and/or aggressive (numerically lower) wheel offsets as reducing ride height will reduce tire-to-fender liner clearance and the additional caster will move the wheel forward slightly. These factors can combine to allow the tire to rub on the fender liner at or near full steering lock such as when reversing out of a parking spot.

SPR Control Arms - Front

Vehicle Fitment

  • 2015-2026 Audi A3
  • 2015-2027 Audi A3 Quattro
  • 2017-2027 Audi RS3
  • 2015-2027 Audi S3
  • 2015-2027 Volkswagen GTI
  • 2015-2021 Volkswagen Golf
  • 2017-2019 Volkswagen Golf Alltrack
  • 2015-2027 Volkswagen Golf R
  • 2015-2019 Volkswagen Golf SportWagen
  • 2015-2020 Volkswagen e-Golf

Important fitment note:

  • Complete pair of Alloy arms - adds 0.5 to 2.0 deg positive caster and -0.25deg camber

Note: Factory Fit - SuperPro Alloy control arms enhance performance and handling, but also provide an quick and significant upgrade whether you DIY or have them installed by your SuperPro Authorized Dealer

Specifications

  • Manufacturer Part Number: ALOY0018K
  • Supplier Part Number: sprALOY0018K
  • Type: Control Arm Kit
  • Shipping Dimensions: 23.8 x 16.5 x 4.4 in
  • Shipping Weight: 15.1 lb
  • EAN: 9317745781158
  • Installation Time: 2.5 Hours
  • Kit Contents: 2 Arms
  • Kits Required: 1
  • Fitting Position: Front

Manufacturer Part Number: ALOY0018K

Images are for illustrative purposes only. Actual product may vary.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer's Warranty — SuperPro

SuperPro Suspension Bushings, Sway Bars and Suspension Arms are covered by a Lifetime Warranty against manufacturing defects, and SuperPro places no limitation on the scope of use — on-road, off-road, racetrack and competitive motorsport all remain warranty-eligible. Ball Joints, Tie Rod Ends, Duroballs and Links are covered by a 3-year / 36,000-mile / 60,000-km warranty. Cover is limited to replacement of the originally supplied SuperPro component, and SuperPro may supply a superseded version; it does not reimburse or refund warranty-eligible products, installation, alignment or related expenses. Product finish and normal wear are excluded, including surface degradation and corrosion from road salt, debris or the elements, as is damage or premature wear caused by incorrect installation or by failing to align the wheels as recommended. Removal and replacement labour and consequential damage are not covered where local law permits that limit. A claim requires proof of original purchase from an authorised reseller showing the claimant as the purchaser, and the part must have been originally supplied for the specific application listed in the SuperPro catalogue.

Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by SuperPro. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!