BMR Suspension
BMR 05-10 S197 Mustang K-Member with No Motor Mounts and STD. Rack Mounts - Red
BMR 05-10 S197 Mustang K-Member with No Motor Mounts and STD. Rack Mounts - Red
Couldn't load pickup availability
Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR's suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member is designed with no engine mounts, allowing you to mount the engine in the car with custom motor plates. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 19-pounds, giving you a 27-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 80 pounds is easily achievable.BMR's suspensions KM009 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.! BMR’s K-member (KM009) is a fully bolt-on upgrade that weighs only 19 pounds and is designed for street performance, drag racing, and handling applications.
- Available in red or black hammertone powder coat for long lasting good looks
- Manufactured from 1-inch, 1.25-inch, and 1.5-inch DOM steel tubing
- 27 pounds lighter than the OE K-member and engine mounts
- Designed for use with stock hydraulic steering racks
- Adds clearance for large-tube headers and turbo kits
- Compatible with stock and BMR control arms
- Designed with no engine mounts
- Fits 2005-2010 S197 Mustangs
- Fits 2007-2010 Shelby GT500s
- Proudly designed in the USA!
- 3-4 hour installation time
- Proudly made in the USA!
- Weighs only 19 pounds
- 100% bolt-on design
Vehicle Fitment
- 2005-2010 Ford Mustang
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: KM009R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!