Camburg Engineering
Camburg Engineering CAM-320002 Leaf Spring Shackle Kit (1.5 in) for 2007-2021 Toyota Tundra (2WD and 4WD)
Camburg Engineering CAM-320002 Leaf Spring Shackle Kit (1.5 in) for 2007-2021 Toyota Tundra (2WD and 4WD)
Couldn't load pickup availability
Camburg Engineering CAM-320002 Leaf Spring Shackle Kit, 1.5 in, for 2007-2021 Toyota Tundra.
Not only are they longer than stock to give you the lift you're looking without stiffening the ride, but are built considerably stronger too.
Key Features
- The stock shackles are just stamped out of thin metal and bolted together allowing for quite a bit of unwanted flex
- Our Camburg shackles are laser cut from thick 3/8" steel and have a welded in gusset bridging the side plates together to eliminate flex
- We powder coat them wrinkle black and supply new metric bolts and hardware to bolt right into the factory mounts
- These measure 6" bolt to bolt center in length, the stock shackles measure 4"
- When using these with the stock leaf springs you may need to grind the serrated teeth on the leaf spring pivot sleeves so it slips into our shackle
- These shackles are also needed when running Deaver's K-37 or U-748 leaf spring packs as the stock shackle is too short in length
- When installing, have the M14 bolts with the lock nuts to the outside on both sides and you will re-use the upper sleeve in the frame pivot bushings
- Orientate the shackle like pictured above so that the center gusset clears the frame as it swings back
Fits These Vehicles
- Fits 2007-2021 Toyota Tundra
Confirm the model year, the trim and the part number against your vehicle before ordering.
Camburg Engineering warrants its non-wearable suspension components against defects in material and workmanship with a limited lifetime warranty for the original purchaser under normal use and service. Wearable parts such as uniballs, heim joints, bushings, bump stops and ball joints are covered for 60 days from the date of purchase, and coatings and finishes are covered for 12 months against structural corrosion and manufacturing defects. Improper installation, alteration, commercial vehicle use, racing or competitive use, normal wear, and labor, alignment and shipping costs are not covered.
Specifications
- Brand: Camburg Engineering
- Manufacturer Part Number: CAM-320002
- Type: Leaf Spring Shackle
- Material: Steel
- Manufacturer Warranty: Limited Lifetime Warranty (wearable parts 60 days)
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Camburg Engineering
▾
Manufacturer's Warranty — Camburg Engineering
Camburg Engineering warrants its suspension products against defects in material and workmanship for as long as the original purchaser owns the vehicle on which they were originally installed, provided they are installed properly on the vehicle they were designed for. Non-wearable parts made by Camburg carry a limited lifetime warranty for the original owner under normal use and service. Wearable parts — including bushings, bump stops, rubber or plastic components, bearings, tie rod ends, uniballs, heim joints and ball joints — are covered for 60 days from the date of purchase against manufacturing defects. Coatings and finishes are covered for 12 months against structural corrosion and manufacturing defects; scratches, fading, surface corrosion and other cosmetic issues are not. Not covered: parts that have been altered; damage from incorrect installation, misuse, neglect, improper maintenance or accidents; products installed on commercial vehicles; any use during racing or competitive events; normal wear and tear; and costs other than the part itself, including labor, alignment, shipping and vehicle downtime. Parts in a kit that Camburg does not make, such as FOX or King shocks, are covered by that manufacturer’s own warranty. To make a claim, present the warranty certificate and proof of purchase to Camburg or to the seller you bought the part from, and return the original part in exchange for a new part of the same part number; each claim is decided case by case at Camburg’s discretion. For Camburg parts bought from PitStopTuning, start your claim with us.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!