Carli Suspension CS-CA-MS16-94 Extended Control Arms (Mild Steel, 14mm / 16mm) for 1998.5-2002 Dodge Ram 2500 / 3500 4x4

Comprising this link system are upper and lower control arms to hold the axle fore/aft while the track bar serves as the lateral link to minimize lateral shift. When lifting the front end of a straight axle truck, you're essentially pushing the axle further away from the frame at ride-height. As the travel is not perfectly linear, the new ride height will set the front axle off-center unless the proper linkages are addressed. The systems we design for these trucks range from 2.5 in-3 in of front lift. Three inches of front lift equates to an axle shifted toward the driver's side ¾" and back toward the cab ½".

Key Features

• Includes 4 Arms Pictured, 2 Upper, 2 Lower
• Re-centers front axle on 3 in Suspension Systems
• Box 0.120 in wall mild steel construction
• Arm centers welded off-center for tire clearance
• 35 in Tire Fitment (9 in Wide Wheel, 5.75 in BS)
• Fits 14mm upper/16mm lower hardware – Factory bolt shank diameter
• MUST measure control arm bolts on truck to ensure correction selection

Fits These Vehicles

• Fits 1998-2002 Dodge Ram 2500 (1998.5 and later)
• Fits 1998-2002 Dodge Ram 3500 (1998.5 and later)

Confirm the model year, the trim and the part number against your vehicle before ordering.

4x4 / 4WD models only.

Carli Suspension warrants the products it manufactures against defects in workmanship and materials for the original purchaser with a limited lifetime warranty. Wear items such as bushings, heim joints, uniballs, airbags and limit straps are excluded, as are rust and corrosion. Alterations, modifications, improper installation, and the costs of removal, installation, freight and consequential damage are not covered.

Specifications

• Brand: Carli Suspension
• Manufacturer Part Number: CS-CA-MS16-94
• Type: Control Arms
• Manufacturer Warranty: Limited Lifetime (original purchaser)
• Condition: New

Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.