Vibrant Performance
Vibrant -10 AN SS Braided Flex Hose (10 foot roll)
Vibrant -10 AN SS Braided Flex Hose (10 foot roll)
Couldn't load pickup availability
Vibrant Performance Braided Flex Hoses are available in Stainless Steel and Nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced CPE synthetic rubber inner liner. Our Braided Flex Hoses are suitable for oil, water, fuel, coolant and vacuum service. Also suitable for E85 and methanol use but fumes will permeate through this type of hose when fuel is left stagnant for long periods of time. See our PTFE Flex Hose for extended E85 and methanol use. These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications). Operating temperature range: -40 Degrees F to 300 Degrees F (-40 Degrees C to 150 Degrees C).
Application
Universal application. Confirm dimensions, mounting points and clearance for your vehicle before ordering.
Manufacturer Part Number: 11920
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Vibrant Performance
▾
Manufacturer's Warranty — Vibrant Performance
All Vibrant Performance products carry a limited warranty covering defects in material and workmanship only. Coverage periods vary by product category — Vibrant does not publish a single term for the whole line, so check with us or with Vibrant for the part you are buying. The product must be installed so it is protected from external and internal physical damage and must be installed in accordance with manufacturer recommendations; Vibrant is not liable for failures caused by improper installation or handling, and coverage is voided if the product is installed on a commercial vehicle. Vibrant's sole obligation is to repair or replace the defective product after inspection by a Vibrant representative, and the warranty makes no allowance for labor claims — costs to remove the defective part or re-install the replacement, and damage to the engine or any other part of the vehicle caused by the defective product, are not covered. A written Returned Goods Authorization (RGA) number is required: anything returned to Vibrant for warranty without an RGA number is refused and returned to sender. Original proof of purchase must be presented with any claim.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Vibrant Performance. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!